Thomas Chambard
- Total activity 159
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 0
- Subscriptions 76
Activity overview
Latest activity by Thomas Chambard-
Thomas Chambard created an article,
What is the model of sander of the sanding kit ?
The model of the sander on the sanding kit is : Dynabrade 56819B. Here is the link to the website of dynabrade: link.
-
Thomas Chambard created an article,
What is the version of my TM Robot ?
::heading=Context There is a big differents between the TM and TM Serie S. That's why it's important to determine what is the version of your robot. ::heading=Knowledge There is 2 Hardwares vers...
-
Thomas Chambard created an article,
Convert a Powerpick20 to a Powerpick30
::heading=Context With the update of payload of the UR Robot, some customer need to update the Powerpick20 to a Powerpick30. ::heading=Knowledge The only difference between a Powerpick20 and a Pow...
-
Thomas Chambard created an article,
Where is the Robotiq serial number on the Palletizer?
::heading=Context We often ask you the Robotiq serial number of the Palletizer. ::heading=Knowledge The Robotiq serial number is written on a plate fix on the palletizer. For the AX10, you can ...
-
Thomas Chambard created an article,
How to Identify the Type of Connector at the Flange of Universal Robot's E-Series Robot?
::heading=Context In September 2024, Universal Robots' e-Series model transitioned to use an M8 female connector at the tool flange. This change aims to reduce the risk of collision damage at the f...
-
Thomas Chambard created an article,
Blank Coupling
::heading=Context When you want to use our product on other robot, we will need your bolt pattern. Then we will check if we can find a coupling that may correspond to your robot. If there are no ...
-
Thomas Chambard created an article,
Fingertips for Machine Tending
::heading=Knowledge Here are the list of all the fingertips for the Machine Tending kit : SKU : HND-FIN-MLD-KIT Included : - 2 x Flat rubber overmolded fingertips- Hardware kit SKU : SOL-...
-
Thomas Chambard created an article,
Integration on Dobot Robot
::heading=Knowledge The Dobot has the same hardware connection as a UR e-series model so you could order the same kit as you would for UR model (with cable to the wrist). Dobot does have a softwar...
-
Thomas Chambard created an article,
Cycle Count for the grippers
::heading=Knowledge Our gripper are counting all the cycles done. But what is really a cycle for our gripper? Here is the method : Grasping an object in the closing motion → counted as one cyc...
-
Thomas Chambard created an article,
How to change the fingers on a 2F Gripper (C4 Version)?
::heading=Problem This article will help you to change the fingers of a 2F85 or a 2F140. ::heading=Solution To replace the fingers of a 2F85 or a 2F140, you will need : 1/- Replacement Fingers Fo...